A complete family of vibration-isolation solutions: pneumatic optical tables with natural frequencies as low as 1.0 Hz, research- and standard-grade damped tables, solid aluminum and honeycomb stainless steel breadboards, rigid supports and granite surface tables. Custom sizes are available across the range.
DVOB-B Series Welded-Honeycomb Stainless Steel Breadboards
- Ferromagnetic stainless steel top plate, rust-resistant
- Carbon-steel welded core, high mechanical strength
- Matte low-reflectance surface
- Good stiffness, minimal load deformation
- Customization available
DVOB-G Series Bonded-Honeycomb Stainless Steel Breadboards
- Damped structure suppresses surface resonance
- Ferromagnetic stainless steel top plate, rust-resistant
- Lightweight bonded honeycomb core, high stiffness
- Fully sealed isolation cups under taps, easy to clean
- Stress-free bonding, no long-term distortion
- Custom sizes available
DVOB-L Series Solid Aluminum Optical Breadboards
- Performance specifications:
- Premium hard aluminum alloy
- Flatness ±0.15 mm per 600 × 600 mm
- 13 mm overall thickness
- M6 mounting holes
- Hole spacing: 25 mm
- Edge spacing: 12.5 mm
- Four M6 counterbores, 12.5 mm edge spacing
DVOB-M Series Granite Surface Tables
- High stiffness, minimal load deformation
- Dense uniform structure, no distortion, workpiece-safe
- Non-magnetic, non-conductive, 100% corrosion-proof
- Fine crystalline structure, no surface bulging
- For metrology and precision part layouts
- Plain or threaded-insert versions available
- Custom sizes available
DVOM-G Series Research-Grade Damped Optical Tables
- Microscopy and biomedical applications
- Optical measurement and experiments
- For instruments with moderate vibration requirements
- Custom sizes available
DVOM-T Series Standard-Grade Damped Optical Tables
- Microscopy and biomedical applications
- Optical measurement and experiments
- For instruments with low vibration requirements
- Custom sizes available
DVOP-D Series Benchtop Pneumatic Isolation Platforms
- Microscopy and biomedical applications
- Optical measurement and experiments
- Precision inspection applications
- Interferometry and spectroscopy
- For instruments with high vibration requirements
DVOP-F Series Pneumatic Vibration-Isolated Optical Tables
- Microscopy and biomedical applications
- Optical measurement and experiments
- Precision inspection applications
- Interferometry and spectroscopy
- For instruments with high vibration requirements
- Custom sizes available
DVOP-I Series Pneumatic Vibration-Isolated Optical Tables
- Performance specifications:
- Natural frequency: 1.0–2.0 Hz vertical and horizontal
- Isolation: pendulum isolators + air springs
- Pneumatic auto-leveling
- Surface roughness < 0.8 µm, matte finish
- Height adjustment −10 to +15 mm
DVOP-T Series Three-Wire Pendulum Isolation Optical Tables
- Performance specifications:
- Natural frequency: 1.0–2.0 Hz vertical / 1.0–1.5 Hz horizontal
- Isolation: pendulum isolators + air springs
- Surface roughness < 0.8 µm, matte finish
- M6 metric mounting holes
- Hole spacing: 25 mm
- Height adjustment −10 to +15 mm
- Uses silent oil-free air compressor
DVOT-L Series Aluminum Extrusion Rigid Supports
- Simple structure, small footprint
- Easy to combine and arrange freely
- Lighter than welded frames
- High load capacity, free instrument placement
- Suitable for use in darkrooms
- Uniform load ≤ 100 kg
- Custom sizes available
DVOT-S Series Welded Rigid Supports
- Simple structure, small footprint
- High load capacity, free instrument placement
- Suitable for use in darkrooms
- Uniform load ≤ 200 kg
- Custom sizes available
Note: product specifications are typical values; detailed drawings and full specifications are available on request. OEM and custom designs are welcome.